23005 Wrong version of operating system; requires Windows NT 3.51 (build |1 or above), or Windows 95 (build |2 or above)
23006 System Error |1.
23010 Internal error: '|1'
23012 File not found: '|1'
23016 Device I/O error: '|1'
23017 File already exists: '|1'
23020 Disk full: '|1'
23021 Input past end of file: '|1'
23026 Too many files: '|1'
23027 Device unavailable: '|1'
23029 Permission denied: '|1'
23030 Disk not ready: '|1'
23034 Path/File access error: '|1'
23035 Path not found: '|1'
23052 Can't save file to TEMP
23053 The form class contained in '|1' is not supported in VBE. The file can't be loaded.
23054 The file, '|1', is marked as a version not supported by the current version of Visual Basic, and won't be loaded.
23056 '|1' is in binary format and cannot be loaded into VB5.
23057 '|1' could not be loaded.
23058 User Documents are not allowed in Standard EXE and UserControl project types.
23059 The project file '|1' is corrupt, and can't be loaded.
23060 Unable to write Designer cache file '|1'. Will just use regular files on Load.
23061 '|1' is an invalid key. The file '|2' can't be loaded.
23062 The project file '|1' contains invalid '|2' key value.
23064 The project file '|1' contains invalid '|2' key value. Valid range is 0 to |3.
23065 The Project name is too long. Name has been truncated.
23066 The project file '|1' contains invalid key '|2'. The project can't be loaded.
23067 User Documents are not allowed in Standard EXE and UserControl project types. Item(s) not loaded.
23078 Can't find file '|1'
23079 Not enough memory to load file
23090 Duplicate procedure name
23091 Can't find Windows Help .EXE file
23095 Can't display system information
23096 Invalid procedure name
23097 A procedure of that name already exists
23098 The application description can't be more than 2000 characters long
23132 Not a legal object name: '|1'
23133 Must specify which item(s) to print
23135 Name '|1' conflicts with existing module, project, or object library
23140 File is read-only
23141 Project file is read-only
23200 Valid values are whole numbers from 1 to 32.
23201 Valid values are whole numbers from 2 to 60
23204 Can't set the project name at this time
23288 Can't start new recording until current session is ended.
23289 Can't perform operation since the project is protected.
25001 Can't remove control or reference; in use
25002 Can't quit at this time
25053 Project file '|1' does not exist.
25054 Error loading '|1'. An error was encountered loading a property. Continue?
25055 Error loading '|1'. A control could not be loaded due to load error. Continue?
25056 '|1' has an old file format. When saved it will be saved in a newer format.
25057 Display more load errors?
25058 '|1' is referenced by '|2' project and cannot be updated.
25059 '|1' already exists in project
25060 '|1' is a Read-Only file
25061 Errors during load. Refer to '|1' for details
25062 '|1' could not be loaded
25063 Version number missing or invalid; Visual Basic 5.0 assumed.
25064 String value too long to process; form load aborted
25065 One or more files in the project have changed. Do you wish to save the changes now?
25066 '|1' could not be registered
25067 User Documents are not allowed in this type of project. Item(s) has(ve) to be removed. Are you sure you want to change the project type?
25068 The current value of '|1' instancing property is not valid in this type of project. The property value has been changed.
25069 Other applications are currently accessing an object in your program. Ending the program now could cause errors in those programs. End program at this time?
25070 One or more of the properties in '|1' was bad. Some or all of the properties might not be set correctly.
25071 '|1' could not be loaded.\n\nRemove it from the list of available Add-Ins?
25072 Visual Basic cannot load '|1' because it is not in the system registry.\n\nRemove it from the list of available Add-Ins?
25073 Conflicting names were found in '|1'. The name '|2' will be used.
25074 Conflicting attributes were found in '|1'. The defaults will be used.
25079 You must save a project before you can reference it.
25080 Do you want to export |1 before removing it?
25081 This command will stop the debugger.
25096 Errors occurred during load.
25100 Line |1: The Form or MDIForm name |2 is not valid; cannot load this form.
25101 Line |1: The control name |2 is invalid.
25102 Line |1: The property name |2 in |3 is invalid.
25103 Line |1: |2 has a quoted string where the property name should be.
25104 Line |1: Property |2 in control |3 had an invalid property index.
25105 Line |1: Property |2 in |3 could not be loaded.
25106 Line |1: Property |2 in |3 must be a quoted string
25107 Line |1: Property |2 in |3 had an invalid value.
25108 Line |1: Property |2 in |3 had an invalid file reference.
25109 Line |1: Property |2 in |3 could not be set.
25110 Line |1: Class |2 of control |3 was not a loaded control class.
25111 Line |1: Did not find an index property and control |2 already exists.
25112 Line |1: Control name too long; truncated to |2.
25113 Line |1: Class name too long; truncated to |2.
25114 Line |1: Syntax error: property |2 in |3 was missing an '='.
25115 Line |1: Parent menu |2 cannot be loaded as a separator.
25116 Line |1: Cannot set checked property in menu |2. Parent menu cannot be checked.
25117 Line |1: Cannot set shortcut property in menu |2. Parent menu cannot have a shortcut key.
25119 Line |1: The Form or MDIForm name |2 is already in use; cannot load this form.
25120 Line |1: The file |2 could not be loaded.
25121 Line |1: Maximum nesting level for controls exceeded with |2.
25122 Line |1: All controls must precede menus; cannot load control |2.
25123 Line |1: Cannot load control |2; containing control not a valid container.
25124 Line |1: Cannot load control |2; name already in use.
25125 Line |1: Missing or invalid control class in file |2
25126 Line |1: Missing or invalid control name in file |2.
25128 Line |1: Cannot create embedded object in |2; license not found.
25129 Line |1: Cannot create embedded object in |2.
25130 Line |1: Cannot load control |2; license not found.
25131 Line |1: Cannot load control |2.
25132 Line |1: The CLSID |2 for |3 is invalid.
25133 Line |1: Could not create reference: '|2'.
25140 MDI Forms are not allowed in this type of project. Item(s) has(ve) to be removed. Are you sure you want to change the project type?
25179 Could not create reference: '|1'.
25180 Ln |1, Col |2
25182 '|1' will not be loaded. Name is already in use.
32768 This functionality is not yet implemented.
32771 Seek failed: can't read/write from the disk
32772 Unable to read from the disk
32773 Unable to write to the disk
32789 SHARE.EXE required
32792 Invalid data format
32793 File format no longer supported
32796 Error accessing the system registry
32797 Object library not registered
32807 User-defined type not defined
32808 Qualified name disallowed in module scope
32812 Ambiguous name detected: ~
32813 Name conflicts with existing module, project, or object library
32814 Unrecognized project language
35011 The .VBP file for this project contains an invalid or corrupt library references ID
35013 Fixed or static data can't be larger than 64K
35015 Expected procedure, not module
35016 Expected procedure, not user-defined type
35017 Expected procedure, not project or library
35018 Expected procedure, not variable
35019 Expected user-defined type, not project
35020 Invalid use of property
35021 Can't find project or library
35022 Object library feature not supported
35024 A module is not a valid type
35025 Automation type not supported in Visual Basic
35026 Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic
36267 Error
36268 Null
36269 False
36270 No
36271 Off
36272 True
36273 Yes
36274 On
36275 dd'-'mmm'-'yy
40035 Functionality not supported in DLL
40037 Expression not defined in context
40038 Object library ~ for Visual Basic for applications not found
40039 Specified library or project already referenced
40041 Missing end bracket
40042 Invalid type-declaration character
40044 Invalid character
40045 Identifier too long
40046 Statement too complex
40047 Expected: <various>
40048 Syntax error
40049 Must be first statement on the line
40051 Invalid outside procedure
40052 Invalid inside procedure
40053 Statement invalid outside Type block
40054 Statement invalid inside Type block
40055 Array already dimensioned
40056 Duplicate Option statement
40057 Deftype statements must precede declarations
40058 Duplicate Deftype statement
40059 Invalid in Immediate pane
40061 Invalid Access mode
40064 Too many dimensions
40065 Too many arguments
40066 Invalid procedure name
40067 Definitions of property procedures for the same property are inconsistent or contain optional parameters or a ParamArray
40068 Circular dependencies between modules
40069 Forward reference to user-defined type
40070 Module not found
40071 Project not found
40073 Expected Sub, Function, or Property
40074 Expected array
40075 Wrong number of dimensions
40076 Expected Function or variable
40077 ByRef argument type mismatch
40078 Type mismatch: array or user-defined type expected
40079 Expected End Sub
40080 Expected End Function
40081 Only comments may appear after End Sub, End Function, or End Property
40082 Block If without End If
40083 While without Wend
40084 Do without Loop
40085 For without Next
40086 Else without If
40087 End If without block If
40088 Next without For
40089 Loop without Do
40090 Wend without While
40091 Exit For not within For...Next
40092 Exit Do not within Do...Loop
40093 Can't assign to array
40094 Invalid qualifier
40095 Duplicate declaration in current scope
40096 Array argument must be ByRef
40098 Exit Function not allowed in Sub or Property
40099 Exit Sub not allowed in Function or Property
40100 Label not defined
40101 Type-declaration character not allowed
40102 Type-declaration character does not match declared data type
40103 Type-declaration character required
40104 Method or data member not found
40105 Case Else outside Select Case
40106 Case without Select Case
40107 End Select without Select Case
40108 Select Case without End Select
40109 Range has no values
40110 Invalid data type for constant
40111 Variable not defined
40112 Invalid length for fixed-length string
40113 LSet allowed only on strings and user-defined types
40114 Constant expression required
40115 Expected variable or procedure, not module
40116 Expected variable or procedure, not project
40117 Can't change data types of array elements
40118 Qualifier must be collection
40119 For Each control variable must be Variant or Object
40120 Variable required - can't assign to this expression
40121 Invalid use of object
40123 Can't assign or coerce array of fixed-length string or user-defined type to Variant
40124 External name not defined
40125 Argument required for Property Let or Property Set
40126 Expected End Property
40127 Exit Property not allowed in Function or Sub
40128 Named argument already specified
40129 Named arguments not allowed
40130 Argument in ParamArray may not be named
40131 Current module does not support Print method
40132 Invalid ParamArray use
40133 With object must be user-defined type, Object, or Variant
40134 End With without With
40135 Expected End With
40136 Invalid or unqualified reference
40137 For Each control variable on arrays must be Variant
40138 For Each may not be used on array of user-defined type or fixed-length strings
40139 For Each may only iterate over a collection object or an array
40140 User-defined type may not be passed ByVal
40141 Invalid Next control variable reference
40142 For control variable already in use
40143 Optional argument must be Variant or intrinsic type with a default value
40144 ParamArray must be declared as an array of Variant
40145 RSet allowed only on strings
40146 LSet not allowed
40147 Invalid attribute in Sub or Function
40148 Function call on left-hand side of assignment must return Variant or Object
40149 Invalid ReDim
40150 Destination label too far away; loop, Select Case, or block If too large
40151 Expected:
40152 or
40153 end of statement
40154 bracketed expression
40155 identifier
40156 object variable
40157 variable or function call
40158 line number
40159 0
40160 1
40161 statement
40162 type name
40163 expression
40164 list separator
40165 .
40166 !
40167 variable
40168 subroutine
40169 label
40170 Identifier without type suffix
40171 graphics statement
40172 letter
40173 string constant
40174 named parameter
40175 Cyclic reference of projects not allowed
40176 Out of resources
40179 Requested type library or wizard is not a VBA project
40188 User-defined type without members not allowed
40190 Incorrect DLL version
40191 Incorrect OLE version
40192 Too many line continuations
40193 Edit can't be undone--proceed anyway?
40195 Run-time error '|'
40196 Insufficient memory to save Undo information
40198 Can't edit module
40199 Language/country setting has changed
40200 Warning: custom language settings not portable
40201 Compile error in hidden module: ~
40202 Unmatched brackets in search string
40203 Search string must be specified
40204 Search text is not found
40205 Line too long
40206 No text selected
40207 Search string too long or complex
40209 End of search scope has been reached; do you want to continue from the beginning?
40210 Beginning of search scope has been reached; do you want to continue from the end?
40211 Identifier under cursor is not recognized
40215 Invalid watch expression
40216 Selected watch expression invalid
40217 Empty watch expression
40218 No watch expression selected
40219 Breakpoint not allowed on this line
40220 Out of context
40221 Can't compile module
40222 Can't evaluate watches on arrays of fixed length strings
40224 (All Procedures)
40225 (All Modules)
40226 Expression
40227 Value
40228 Context
40229 Out of memory; some watches might have been deleted
40231 Can't display hidden procedure
40232 Empty
40233 Missing
40234 <Ready>
40235 <Running>
40236 <Non-Basic Code>
40237 <Non-Editable Code>
40238 <Hidden Code>
40239 <Debug Window>
40240 <Break~>
40242 Can't record into running module
40243 File not found: ~
40245 Typing
40246 Delete
40247 Insert Text
40248 Cut
40249 Paste
40250 Parse Line
40251 Replace
40252 Indent
40253 Outdent
40254 Code execution has been interrupted
40255 (Get)
40256 (Let)
40257 (Set)
40258 Selection Text
40259 Syntax Error Text
40260 Execution Point Text
40267 Breakpoint Text
40268 Comment Text
40269 Keyword Text
40270 Identifier Text
40271 Normal Text
40273 (Custom)
40274 Standard
40275 Czech
40276 Danish
40277 German
40278 English
40279 Spanish
40280 Finnish
40281 Swedish
40282 Italian
40283 Dutch
40284 French
40285 Hungarian
40286 Norwegian
40287 Polish
40288 Portuguese
40289 Russian
40290 Turkish
40291 Japanese
40292 Korean
40293 Korea
40294 Chinese
40295 Taiwan
40296 People's Republic of China
40297 Hebrew
40298 Israel
40299 Arabic
40300 Saudi Arabia
40301 Thai
40302 Thailand
40303 Greek
40304 Greece
40305 Czech Republic
40306 Denmark
40307 Germany
40308 Switzerland
40309 Austria
40310 United States
40311 United Kingdom
40312 Australia
40313 Canada
40314 New Zealand
40315 Spain
40316 Mexico
40317 Finland
40318 France
40319 Belgium
40320 Hungary
40321 Italy
40322 Netherlands
40323 Sweden
40324 Norway
40325 Poland
40326 Portugal
40327 Brazil
40328 Russia
40329 Turkey
40330 Japan
40331 Courier
40332 Courier New
40336 Can't Get or Put an object reference variable or a variable of user-defined type containing an object reference
40337 MISSING:
40338 UNSAVED:
40339 <no name specified>
40340 Object library's language setting incompatible with current project
40341 Statements and labels invalid between Select Case and first Case
40342 Can't load module; invalid format
40343 (object)
40347 Invalid use of Me keyword
40348 Invalid use of New keyword
40349 Line is not an executable statement
40350 Set Next Statement can only apply to executable lines within current procedure.
40351 Can't execute code in design mode
40352 Cannot define a Public user-defined type within an object module
40353 User-defined types and fixed-length strings not allowed as the type of a public member of an object module; private object modules not allowed as the type of a public member of a public object module
40354 Invalid syntax for constant declarations
40355 This edit requires a Reset
40356 Member already exists in a object module from which this object module derives
40357 Event procedure declaration does not match description of event having the same name
40358 A compatible ActiveX component must be a Visual Basic executable
40359 Calling convention not supported by Visual Basic
40360 Constants, fixed-length strings, arrays, and Declare statements not allowed as Public members of object modules
40363 Variable not yet created in this context
40364 This action will reset your project, proceed anyway?
40365 An unrecognized error occurred during compilation
57006 The specified region has been searched. ~ replacements were made.
57007 The specified region has been searched.
57008 Object
57009 Procedure
57010 (Declarations)
57011 (General)
57012 VBA Preferences
57013 UNKNOWN TYPE
57015 Can't add a reference to the specified file.
57016 The specified region has been searched. 1 replacement was made.
57018 The edit may make the object module incompatible with the previously specified compatible ActiveX server
57019 Insert File
57020 Choose OK to accept this edit, or choose Cancel to undo.
57021 An # ElseIf, # Else, or # EndIf must be preceded by an # If clause
57022 An # Else clause must be preceded by an # If
57023 An # ElseIf must be preceded by an # If or # ElseIf and followed by an # Else or # EndIf
57024 You must terminate the # If block with an # EndIf
57025 Can't create variable in immediate pane
57026 Module too large
57027 Too many module-level variables
57028 Too many local, nonstatic variables
57029 Project contains too many procedure, variable, and constant names
57030 Procedure too large
57031 Duplicate definition
57032 Method not valid without suitable object
57033 Option Private Module not permitted in a object module
57034 RHS
57035 10
57036 Arial
57037 8
57038 Arial
57039 8
57040 Module
57041 Comment
57042 Uncomment
57043 Bookmark Text
57044 Call Return Text
57045 Switched Out Code Text
57046 Recording Point Text
57047 12
57048 Geneva
57049 9
57050 Geneva
57051 9
57052 Geneva
57053 Arial
57054 9
57055 10
57056 Cannot handle events for the object specified.
57057 Only valid in object module
57058 Search string must be specified
57060 Full Module View
57061 Procedure View
57062 Go Back
57063 Go Forward
57064 Copy to Clipboard
57065 View Definition
57066 Help
57067 Project/Library
57068 Search Text
57069 Methods
57070 Properties/Variables
57071 Events
57072 Constants
57073 Show Search Results
57074 Hide Search Results
57075 Search
57076 Search Results
57077 Translation failed. Please check the trnslate.log file for more information.
57078 Cannot jump to '~' because it is hidden
57079 Cannot jump to '~' because it is in the library '~' which is not currently referenced
57080 The project has been translated into English
57081 Invalid optional parameter type
57082 Assignment to constant not permitted
57083 Invalid event name
57084 Move
57085 Copy
57086 Invalid template
57087 Invalid inside Enum
57088 Can't have paramarrays with optional arguments
57089 Wizards can't reference projects
57090 Compile error
57091 Conditional watch on an array is not allowed
57092 Member of ~
57093 Default member of ~
57094 Can't assign to read-only property
57095 Method '~' of object '~' failed
57096 Invalid use of optional parameter
57097 Can't execute code in break mode
57098 read-only
57099 <Unsupported object type>
57100 <Unsupported variant type>
57101 Can't remove default reference
57102 Event handler is invalid
57103 Can't enter break mode at this time
57104 Can't perform the requested operation because the module is hidden
57105 Unexpected error (~)
57106 (default)
57107 Library
57108 Class
57109 Member
57110 Classes
57111 <All Libraries>
57112 <globals>
57113 No items found
57114 Members of '~'
57115 Type
57116 Private Enum types cannot be used as parameter or return types for public procedures, or as public data members
57117 Not enough memory to completely save project
57118 Insufficient project information to load project on platform or with version now being used.
57120 Object does not source automation events
57121 Can't exit design mode because Control '~' can not be created
57122 <No Variables>
57123 This document was opened with Macros disabled. If you wish to Enable Macros, you should close and re-open the document, choosing the 'Enable Macros' option.
57124 The library which contains this symbol is not referenced by the current project, so the symbol is undefined. Would you like to add a reference to the containing library now?
57125 Object does not have a Property Let
57126 No help available
57127 8
57128 9
57150 Event not found
57151 Object module needs to implement '~' for interface '~'
57152 Not a valid interface for Implements
57153 Object does not fire any events
57154 Expected variable or procedure, not enum type
57155 Enum without members not allowed
57156 Invalid use of AddressOf operator
57157 Invalid use of base class name
58000 Attributes argument constant for Dir or GetAttr
58001 Attributes argument constant for GetAttr or SetAttr
58002 Attributes argument constant for Dir, GetAttr, or SetAttr
58003 Return value constant for MsgBox
58004 Buttons argument constant for MsgBox
58005 Attributes argument constant for Dir or GetAttr
58006 Constant for backspace character; equivalent to Chr$(8)
58007 Constant for carriage return (without linefeed); equivalent to Chr$(13)
58008 Constant for Carriage-return/Linefeed combination; equivalent of Chr$(13)+Chr$(10)
58009 Constant for NewLine; platform specific
58010 FirstDayOfWeek constant
58011 FirstWeekOfYear constant
58012 Constant for form feed (ASCII 12); equivalent to Chr$(12)
58013 Argument constant for IMEStatus
58014 Constant for linefeed (without carriage return); equivalent to Chr$(10)
58015 Basic constant for a single Null character (ASCII value 0); equivalent to Chr$(0)
58016 Constant for use when calling external procedures requiring a string whose value is zero
58017 Constant indicating error is being returned from a Visual Basic object
58018 Argument constant for Shell
58019 Conversion argument constant for StrConv
58020 Constant for Tab character (ASCII 9); equivalent to Chr$(9)
58021 FirstDayOfWeek or FirstWeekOfYear constant
58022 Constant for vertical Tab (ASCII 11) character; equivalent to Chr$(11)
58023 Constant for specifying Gregorian Calendar
58024 Constant for specifying Hijri Calendar
58025 Return value constant for VarType
58026 Properties and methods for collection objects
58027 Predefined constants
58028 Procedures used to perform conversion operations
58029 Procedures used to perform date and time operations
58030 help string for err object
58031 Procedures used to perform file, directory or folder, and system operations
58032 Procedures used to perform financial operations
58033 Procedures used to return, test for, or verify information
58034 Procedures used to interact with objects, applications, and systems
58035 Procedures used to perform mathematical operations
58036 Procedures used to perform string operations
58037 Returns the absolute value of a number
58038 Adds a member to a Collection object
58039 Activates an application window
58040 Returns the ANSI character code of the first character in a string
58041 Returns the value of the first byte in a string
58042 Returns the native character code of the first character in a string (Unicode or ANSI)
58043 Returns the arctangent of a number
58044 Sounds a tone through the computer's speaker
58045 Converts an expression to a Boolean
58046 Converts an expression to a Byte
58047 Converts an expression to a Currency
58048 Converts an expression to a Date
58049 Converts an expression to a Double
58050 Changes the current or default directory on a specified drive
58051 Changes the current drive
58052 Selects and returns a value from a list of arguments
58053 Returns a string containing the character associated with the specified character code
58054 Returns a string containing the specified single byte
58055 Returns a string containing the specified native character (Unicode or ANSI)
58056 Converts an expression to an Integer
58057 Clears all property settings of the Err object
58058 Converts an expression to a Long
58059 Returns the argument portion of the command line
58060 Returns the cosine of an angle
58061 Returns the number of members in a collection
58062 Creates an ActiveX object
58063 Converts an expression to a Single
58064 Converts an expression to a String
58065 Returns the current path
58066 Converts an expression to a Variant
58067 Converts an expression to a Date
58068 Returns a Variant containing a user-specified error number
58069 Sets or returns the current system date
58070 Returns a Variant containing a date to which a specified time interval has been added
58071 Returns the number of time intervals between two specified dates
58072 Returns a specified part of a given date
58073 Returns a Date for a specific year, month, and day
58074 Returns a Date
58075 Returns a whole number representing the day of the week
58076 Returns double-declining balance depreciation of an asset for a specific period
58077 Deletes a section or key setting from an application's entry in the Windows registry entry
58078 Returns or sets the string expression containing a descriptive string associated with an object
58079 Returns the name of a matching file, directory, or folder
58080 Yields execution so that the operating system can process other events
58081 Returns the string assigned to an environment variable
58082 Returns a value that indicates whether the end of a file has been reached
58083 Returns the line number where error occurred
58084 Returns the error number for the error that occurred
58085 Returns the error message for a given error number
58086 Returns e (the base of natural logarithms) raised to a power
58087 Returns file mode for files opened using the open statement
58088 Copies a file
58089 Returns the date and time stamp of a file
58090 Returns the length of a file in bytes
58091 Returns the integer portion of a number
58092 Formats an expression
58093 Returns the next file number available for use by Open
58094 Returns future value of an annuity
58095 Returns a list of key settings and their respective values from an application's Windows registry entry
58096 Returns the attributes of a file, directory, or folder
58097 Returns a reference to an ActiveX object from a file
58098 Returns a key setting value from an application's entry in the Windows registry
58099 Returns or sets a context ID for a topic in a Help file
58100 Returns or sets a fully qualified path to a Help file
58101 Returns a string representing the hexadecimal value of a number
58102 Returns a whole number representing the hour of the day
58103 Returns one of two parts, depending on the evaluation of an expression
58104 Returns the current IME mode of the system
58105 Displays a prompt in a dialog box and returns user input text
58106 Returns the position of the first occurrence of one string within another
58107 Returns the byte position of the first occurrence of one string within another
58108 Returns the integer portion of a number
58109 Returns the interest payment for a given period of an anuity
58110 Returns the internal rate of return for a series of periodic cash flows
58112 Returns True if the variable is an array
58113 Returns True if an expression can be converted to a date
58114 Returns True if a variable has not been initialized
58115 Returns True if an expression is an error value
58116 Returns True if an optional argument has not been passed
58117 Returns True if an expression contains no valid data
58118 Returns True if an expression can be evaluated as a number
58119 Returns True if an identifier represents an object variable
58120 Returns a specific member of a Collection object either by position or key
58121 Deletes files from a disk
58122 Returns system error code from a call to a DLL
58123 Returns a string converted to lowercase
58124 Returns a specified number of characters from the left side of a string
58125 Returns a specified number of bytes from the left side of a string
58126 Returns string length or bytes required to store a variable
58127 Returns the bytes required to store a variable
58128 Returns the current read/write position within an open file
58129 Returns the size (in bytes) of an open file
58130 Returns the natural logarithm of a number
58131 Returns a copy of a string without leading spaces
58132 Converts a four-character constant to a Macintosh file type or signature
58133 Returns specified number of characters from a string
58134 Returns the specified number of bytes from a string
58135 Returns a whole number representing the minute of the hour
58136 Returns the modified internal rate of return for a series of periodic cash flows
58137 Creates a new directory or folder
58138 Returns a whole number representing the month of the year
58139 Displays a dialog box and returns the value of the user's selection
58140 Returns the current system date and time
58141 Returns the number of periods for an annuity
58142 Returns the net present value of an investment
58143 Returns or sets a numeric value representing an error
58144 Returns a string representing the octal value of a number
58145 Returns the payment for an annuity
58146 Returns the principal payment for a given period of an annuity
58147 Returns the present value of an annuity
58148 Returns the RGB color code for a specified color number from a list of predefined standard colors
58149 Generates a run-time error
58150 Initializes the random-number generator
58151 Returns the interest rate per period for an annuity
58152 Removes a member from a Collection object
58153 Closes all open disk files
58154 Returns a whole number representing an RGB color value
58155 Returns a specified number of characters from the right side of a string
58156 Returns the specified number of bytes from the right side of a string
58157 Removes an existing directory or folder
58158 Returns a random number
58159 Returns a copy of a string without trailing spaces
58160 Saves a setting under the specified appname, section and key
58161 Returns a whole number representing the second of the minute
58162 Sets or returns the current read/write position within an open file
58163 Sends keystroke(s) to the active window
58164 Sets attribute information for a file
58165 Returns an integer indicating the sign of a number
58166 Runs an executable program
58167 Returns the sine of an angle
58168 Returns the straight-line depreciation of an asset for a single period
58169 Returns or sets the name of the object that originated the error
58170 Returns a string consisting of the specified number of spaces
58171 Returns the square root of a number
58172 Returns a string representation of a number
58173 Returns the result of a string comparison
58174 Returns a converted string
58175 Returns a repeating character string of the length specified
58176 Returns the first value or expression in a list that is true
58177 Returns the sum-of-years' digits depreciation on an asset
58178 Returns the tangent of an angle
58179 Sets or returns the current system time
58180 Returns the number of seconds elapsed since midnight
58181 Returns the serial representation for a specific hour, minute, and second
58182 Returns a time
58183 Returns a copy of a string without leading and trailing spaces
58184 Returns a string that provides information about a variable
58185 Returns the specified string, converted to uppercase
58186 Returns the numbers contained in a string
58187 Returns a value indicating the subtype of a variable
58188 Returns a whole number representing the day of the week
58189 Returns a whole number representing the year
58190 Sets or returns the current calendar
58191 vbUseCompareOption constant
58192 vbBinaryCompare constant
58193 vbTextCompare constant
58194 vbDatabaseCompare constant
58195 Executes an AppleScript script
58196 Returns string indicating where a number occurs within a series of ranges
58197 Returns a variant with a value converted to a decimal subtype
58198 Invalid outside Enum
58199 Could not execute '~'
59200 Duplicate resource with the same type and name
